Shelby Chrysler Dodge Omni GLHS - Goes Like Hell S'more [ADD-ON / Tuning / Template ] V1.0
1.650
60
1.650
60
2nd Public Release after 2 years!! These are all older mods of mine, some will not correspond to my current standards and will probably not meet yours either! But i still hope that you guys will enjoy these mods! This is the 2nd of them, so don't be a dick, otherwise it might be the last one as well! Cheers.
THIS MOD WAS RELEASED FOR MY PATRONS IN MAY 2020!!!
► MORE VIPs AND EXCLUSIVES LIKE THIS ONE ON MY PATREON PAGE ◄
Outcome of the ⭐️Special Patron Program⭐️ and Requested by a Veteran Patron, Mr. Daniel Barrett here comes the... Shelby Chrysler Dodge Omni GLHS - Goes Like Hell S'more
1986 my birth year... This year, the GLH has been taken under the wing of Carroll Shelby. If you've been held incommunicado in a padded cell for the past few years, you might not know that Mr. Shelby is back in the car business and that this time he's playing with Dodges. A new venture called Shelby Automobiles in Whittier, California, will produce some 500 GLHSs this year, which will be sold through Dodge dealers who sign up for Shelby franchises.
The transformation from the 146-hp GLH to the 175-hp GLHS begins with the addition of an air-to-air intercooler and a Shelby-designed intake manifold to the stock 2.2-liter Turbo II engine. The intercooler allows 12-psi maximum boost pressure, 3 psi more than the standard GLH has. As a result, the torque peak goes up from 168 to 175 pound-feet.
Further modifications include the installation of low-pressure gas-charged Koni shocks all around and an upgrade in the tire department from 195/50HR-15 Eagle GTs to 205/50VR-15 Eagle VR50 gatorbacks. Rear ride height is reduced about half an inch. The GLH's standard one-inch front and five-eighths-inch rear anti-roll bars are left alone. The Shelby treatment also includes a tape package (you can always peel it off) and six-inch cast-aluminum Shelby Centurion wheels.
More Specific Specs and details on the caranddriver.com webpage!
Features:
Livery Support (Template available on my Discord)
Complete 3D HQ
A Few Tuning Parts
HQ Exterior
HQ Interior, Doorsills, Boot & Engine
Hands on Steeringwheel
Working Dials on Dash
Correct Seat Position for FPV & Passenger
Correct Window Tints
Compatible with all Tuning Rimpacks!!
FiveM Compatible
And all other standarts... besides LODs
Known Bugs:
NONE
Install and Enjoy ;)
See Ya Soon Peeps.
Credits:
Screens by: Asyr0n
Base Model: Turn10
Adapted & Rigged: Asyr0n
******** INSTALL IN README ********
--------------------------------------------------------------------------
Make sure to not miss my upcoming Patreon Exclusives by leaving a follow on the ►Asyr0n's Workshop◄ Facebook page!!
THIS MOD WAS RELEASED FOR MY PATRONS IN MAY 2020!!!
► MORE VIPs AND EXCLUSIVES LIKE THIS ONE ON MY PATREON PAGE ◄
Outcome of the ⭐️Special Patron Program⭐️ and Requested by a Veteran Patron, Mr. Daniel Barrett here comes the... Shelby Chrysler Dodge Omni GLHS - Goes Like Hell S'more
1986 my birth year... This year, the GLH has been taken under the wing of Carroll Shelby. If you've been held incommunicado in a padded cell for the past few years, you might not know that Mr. Shelby is back in the car business and that this time he's playing with Dodges. A new venture called Shelby Automobiles in Whittier, California, will produce some 500 GLHSs this year, which will be sold through Dodge dealers who sign up for Shelby franchises.
The transformation from the 146-hp GLH to the 175-hp GLHS begins with the addition of an air-to-air intercooler and a Shelby-designed intake manifold to the stock 2.2-liter Turbo II engine. The intercooler allows 12-psi maximum boost pressure, 3 psi more than the standard GLH has. As a result, the torque peak goes up from 168 to 175 pound-feet.
Further modifications include the installation of low-pressure gas-charged Koni shocks all around and an upgrade in the tire department from 195/50HR-15 Eagle GTs to 205/50VR-15 Eagle VR50 gatorbacks. Rear ride height is reduced about half an inch. The GLH's standard one-inch front and five-eighths-inch rear anti-roll bars are left alone. The Shelby treatment also includes a tape package (you can always peel it off) and six-inch cast-aluminum Shelby Centurion wheels.
More Specific Specs and details on the caranddriver.com webpage!
Features:
Livery Support (Template available on my Discord)
Complete 3D HQ
A Few Tuning Parts
HQ Exterior
HQ Interior, Doorsills, Boot & Engine
Hands on Steeringwheel
Working Dials on Dash
Correct Seat Position for FPV & Passenger
Correct Window Tints
Compatible with all Tuning Rimpacks!!
FiveM Compatible
And all other standarts... besides LODs
Known Bugs:
NONE
Install and Enjoy ;)
See Ya Soon Peeps.
Credits:
Screens by: Asyr0n
Base Model: Turn10
Adapted & Rigged: Asyr0n
******** INSTALL IN README ********
--------------------------------------------------------------------------
Make sure to not miss my upcoming Patreon Exclusives by leaving a follow on the ►Asyr0n's Workshop◄ Facebook page!!
Først uploadet: 19. juli 2022
Sidst opdateret: 20. juli 2022
Last Downloaded: en dag siden
13 Kommentarer
2nd Public Release after 2 years!! These are all older mods of mine, some will not correspond to my current standards and will probably not meet yours either! But i still hope that you guys will enjoy these mods! This is the 2nd of them, so don't be a dick, otherwise it might be the last one as well! Cheers.
THIS MOD WAS RELEASED FOR MY PATRONS IN MAY 2020!!!
► MORE VIPs AND EXCLUSIVES LIKE THIS ONE ON MY PATREON PAGE ◄
Outcome of the ⭐️Special Patron Program⭐️ and Requested by a Veteran Patron, Mr. Daniel Barrett here comes the... Shelby Chrysler Dodge Omni GLHS - Goes Like Hell S'more
1986 my birth year... This year, the GLH has been taken under the wing of Carroll Shelby. If you've been held incommunicado in a padded cell for the past few years, you might not know that Mr. Shelby is back in the car business and that this time he's playing with Dodges. A new venture called Shelby Automobiles in Whittier, California, will produce some 500 GLHSs this year, which will be sold through Dodge dealers who sign up for Shelby franchises.
The transformation from the 146-hp GLH to the 175-hp GLHS begins with the addition of an air-to-air intercooler and a Shelby-designed intake manifold to the stock 2.2-liter Turbo II engine. The intercooler allows 12-psi maximum boost pressure, 3 psi more than the standard GLH has. As a result, the torque peak goes up from 168 to 175 pound-feet.
Further modifications include the installation of low-pressure gas-charged Koni shocks all around and an upgrade in the tire department from 195/50HR-15 Eagle GTs to 205/50VR-15 Eagle VR50 gatorbacks. Rear ride height is reduced about half an inch. The GLH's standard one-inch front and five-eighths-inch rear anti-roll bars are left alone. The Shelby treatment also includes a tape package (you can always peel it off) and six-inch cast-aluminum Shelby Centurion wheels.
More Specific Specs and details on the caranddriver.com webpage!
Features:
Livery Support (Template available on my Discord)
Complete 3D HQ
A Few Tuning Parts
HQ Exterior
HQ Interior, Doorsills, Boot & Engine
Hands on Steeringwheel
Working Dials on Dash
Correct Seat Position for FPV & Passenger
Correct Window Tints
Compatible with all Tuning Rimpacks!!
FiveM Compatible
And all other standarts... besides LODs
Known Bugs:
NONE
Install and Enjoy ;)
See Ya Soon Peeps.
Credits:
Screens by: Asyr0n
Base Model: Turn10
Adapted & Rigged: Asyr0n
******** INSTALL IN README ********
--------------------------------------------------------------------------
Make sure to not miss my upcoming Patreon Exclusives by leaving a follow on the ►Asyr0n's Workshop◄ Facebook page!!
THIS MOD WAS RELEASED FOR MY PATRONS IN MAY 2020!!!
► MORE VIPs AND EXCLUSIVES LIKE THIS ONE ON MY PATREON PAGE ◄
Outcome of the ⭐️Special Patron Program⭐️ and Requested by a Veteran Patron, Mr. Daniel Barrett here comes the... Shelby Chrysler Dodge Omni GLHS - Goes Like Hell S'more
1986 my birth year... This year, the GLH has been taken under the wing of Carroll Shelby. If you've been held incommunicado in a padded cell for the past few years, you might not know that Mr. Shelby is back in the car business and that this time he's playing with Dodges. A new venture called Shelby Automobiles in Whittier, California, will produce some 500 GLHSs this year, which will be sold through Dodge dealers who sign up for Shelby franchises.
The transformation from the 146-hp GLH to the 175-hp GLHS begins with the addition of an air-to-air intercooler and a Shelby-designed intake manifold to the stock 2.2-liter Turbo II engine. The intercooler allows 12-psi maximum boost pressure, 3 psi more than the standard GLH has. As a result, the torque peak goes up from 168 to 175 pound-feet.
Further modifications include the installation of low-pressure gas-charged Koni shocks all around and an upgrade in the tire department from 195/50HR-15 Eagle GTs to 205/50VR-15 Eagle VR50 gatorbacks. Rear ride height is reduced about half an inch. The GLH's standard one-inch front and five-eighths-inch rear anti-roll bars are left alone. The Shelby treatment also includes a tape package (you can always peel it off) and six-inch cast-aluminum Shelby Centurion wheels.
More Specific Specs and details on the caranddriver.com webpage!
Features:
Livery Support (Template available on my Discord)
Complete 3D HQ
A Few Tuning Parts
HQ Exterior
HQ Interior, Doorsills, Boot & Engine
Hands on Steeringwheel
Working Dials on Dash
Correct Seat Position for FPV & Passenger
Correct Window Tints
Compatible with all Tuning Rimpacks!!
FiveM Compatible
And all other standarts... besides LODs
Known Bugs:
NONE
Install and Enjoy ;)
See Ya Soon Peeps.
Credits:
Screens by: Asyr0n
Base Model: Turn10
Adapted & Rigged: Asyr0n
******** INSTALL IN README ********
--------------------------------------------------------------------------
Make sure to not miss my upcoming Patreon Exclusives by leaving a follow on the ►Asyr0n's Workshop◄ Facebook page!!
Først uploadet: 19. juli 2022
Sidst opdateret: 20. juli 2022
Last Downloaded: en dag siden
This file has been approved automatically. If you think this file should not be here for any reason please report it.
Love it!
@[DTD] Asyr0n welcome back bro!
@[DTD] Asyr0n Thanks for this one! I had the little-brother non-turbo version (Plymouth Horizon) in college (a whole gang of years ago). Absolutely LOVED that little car!!! Smooth ride, great MPG, "sport-tey" performance... ok, "not-so-sporty" performance, but I loved it anyway. Thanks again for this WONDERFUL memory!
From deep in the 80's. Love it!
The name in Europe was Talbot Horizon. It was the police car in Spain until 1990. Awasome. Congratulations,
hell yeah this will go amazing with my 89 dodge daytona shelby
@shelbycsx87 @GrandDaddyDoug Glad you like it boys, I'm always happy to surprise some real petrol heads and revive some old good memories. Enjoy ;)
@asyron how can i get my hands on the motor. i have a 89 dodge daytona i had modeled from scratch but i could never get the motor. where did you get the motor or did that one come with it
Does this have custom soundfiles?
Going to be using this in FiveM,and I've had trouble with random car mods not having working soundfiles.(if they use custom sounds,not stock GTA 5 vehicle soundfiles.)
@michaelh73 it uses the original V sound, if sound line is missing in the vehicles.meta file then it will not work, that's for sure.
@shelbycsx87 this is a simple port from Forza, engine came with it.
this was the first car that i owned i still regret selling it thanks for making this mod
For some reason in-game this car is rear-wheel-drive?
(IRL it's front-wheel-drive.)